MONSTER 795

Technical specification :

Engine :
TypeL-Twin cylinder, 2 valve per cylinder Desmodromic, air cooled
Displacement803cc
Bore x Stroke88 x 66mm
Compression ratio11:01
Power64kW - 87 CV @ 8250 rpm
Torque78 Nm - 8 kgm @ 6250 rpm
Fuel injectionSiemens electronic fuel injection, 45mm throttle body with stepper motor
ExhaustLightweight 2-1-2 system with catalytic converter and twin lambda probes

Transmission :
Gearbox6-speed
Primary driveStraight cut gears; Ratio 1.85:1
Ratio1=32/13 2=30/18 3=28/21 4=26/23 5=22/22 6=24/26
Final driveChain; Front sprocket 15; Rear sprocket 39
ClutchAPTC wet multiplate with hydraulic control

Chassis :
FrameTubular chrome moly steel trellis, casted aluminium subframe
Front suspension43mm upside-down forks
Front wheel3-spoke light alloy 3.50 x 17
Front Tyre120/60 ZR 17 Pirelli Angel ST
Rear suspensionDouble sides swingarm
Rear wheel3-spoke light alloy 4.50 x 17
Rear tyre160/60 ZR 17 Pirelli Angel ST
Front wheel travel120mm (4.7in)
Rear wheel travel148mm (5.8in)
Front brake2 x 320mm discs, 4-piston radial calliper
Rear brake245mm disc, 2-piston calliper

Instrumentation :
Digital unit displaying: Speedometer, rev counter, time, scheduled maintenance warning, oil temperature, trip fuel, lap time, warning light for low oil pressure, fuel level, fuel reserve, neutral, turn signals, overrev, immobilizer. Ready for DDA system.

Dimensions and weight :
Dry weight167kg (368lb)
Wet weight(KERB)187kg (412lb)
Seat height770mm (30.3in)
Wheelbase1450 mm (57.1in)
Rake24°
Trail87mm (3,42 in)
Fuel tank capacity15 l (3.8 US gal) / 13,5 l (3.6 US gal) ABS version
Number of seatsDual seat

Equipments :
Standard EquipmentDDA ready
Warranty
Warranty2 years unlimited mileage
Maintenance service intervals12.000 km (7.500m)
Valve clearance check12.000 km (7.500m)
Emissions and Consumption
StandardEuro 3